Halbautomatische Verschlusskappenmaschine

Modellnr.: WLFM Zustand: Neu Angepasst: Kundenspezifisch Stromquelle: Elektro Produkttyp: Rollformmaschine Hauptmotorleistung: 4 kW. Fütterungsbreite: 500mm. Streckgrenze: 235 MPa (33 ksi) ~ 345 MPa (50 ksi). Manueller Abwickler: max. Kapazität: 3000kg. Spannung: nach Kundenwunsch. Transportverpackung: Holzkisten Herkunft: China Zertifizierung: CE, ISO Schraubenausführung: Doppelschraube Anwendung: Platten, Maschinen & Hardware Automatisch Qualität: Automatisch Dicke: 0,3 mm bis 0,7 mm. Hydraulische Stationsleistung: 3 kW. Abdeckungsbreite: 382 mm. Rollformungsgeschwindigkeit: 12 M/Minute. Spuleninnendurchmesser: 508 mm. Marke: WILLING Spezifikation: CE & ISO Automatische selbstsichernde Kappenmaschine Komponenten der Maschine:
Die Rollformmaschine besteht aus einer manuellen Abwickelvorrichtung, einer Einlaufführung, festpositionsgetriebenen Formstationen, einer Schneideausrüstung, einer Hydraulikstation, einer Steuerkonsole und einem manuellen Entladeproduktlauf Tisch aus.


Prozessskizze:
Abspulen des Blechs ---- Einlaufführung ---- Rollformen ---- Länge messen
Zuschneiden der Platte ---- Platten zum Träger.




Versanddokumente:
1) Frachtbrief, ein vollständiger Satz; 2) Handelsrechnung, Verdreifachung, 3) Packliste, Verdreifachung.

Komponente und Funktion:

Coil Feeding Equipment					Consists of one uncoiler with capacity of 5 tons and its base. The steel sheet is manually fed to the guiding equipment under the function of friction and traction.
Infeed Guide					Adopting guiding bar and sliding block (sheet lubricator) to control the width and position of the steel sheet. The coil sheet is guided in the correct position and passed to the roll forming equipment.
Mainframe Transmission					Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet.ition and passed to the roll forming equipment.
Roll Forming Stationt.					The main frame of machine is welded separately and the outside wall is connected by screw after being roto blasted on the surface. The rollers are surface-chrome plated after being machined by the exact machine tool. The tooling is PLC precision machined and supported with pre-lubricated rolling contact bearings.
Post-cut Equipment					Stationary hydraulic post shear/guillotine. The length and quantity of pieces can be set by the buyer through the control console, when reach the set length, the machine will cut the panel automatically. The cutting is finished under the power of hydraulic station which guarantees the precision of cutting.
Pressing Die System					To make pressing die for the steel sheet after roll formed, the shape of corrugated sheet will be pressed into steps. The distance of step length can be adjusted.e power of hydraulic station which guarantees the precision of cutting.
Hydraulic Station					Supplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power.length can be adjusted.e power of hydraulic station which guarantees the precision of cutting.
PLC Control Console					The electric controlling system of this machine consists of five parts: operating system, touch screen, PLC, transducer and strong electricity parts. The controlling system of this machine is imported from Siemens, Germany. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be chosenoperation by manual or automatically.ystem, touch screen, PLC, transducer and strong electricity parts. The controlling system of this machine is imported from Siemens, Germany. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be chosenoperation by manual or automatically.ystem, touch screen, PLC, transducer and strong electricity parts. The controlling system of this machine is imported from Siemens, Germany. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be chosenoperation by manual or automatically.ystem, touch screen, PLC, transducer and strong electricity parts. The controlling system of this machine is imported from Siemens, Germany. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be chosen operation by manual or automatically.gth 2 meters; it can support panels with more than 4 meters in normal condition.ens, Germany. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be chosen operation by manual or automatically.
Product Support Table					To support the finished run out panels. The quantity we supply is 2 pieces with length 2 meters; it can support panels with more than 4 meters in normal condition.ens, Germany. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be chosen

Wir sind ein Hersteller in China,
wir können Maschine nach Ihren Wünschen herstellen. Über das Gerät
Sie müssen uns Informationen zur Verfügung stellen,
1. Profilzeichnung und Produktgröße (Modell),
2. Stahldickenbereich,
3. Spulenbreite,
4. Stahlspannung,
5. Anforderungen für die Konfiguration.

FAQ:
1) F: Sind Sie Hersteller oder Handelsunternehmen?
A: Wir sind Hersteller und Handelsunternehmen.

2) F: Bieten Sie Installationen und Schulungen im Ausland an?
A: Wie Auf Wunsch des Käufers bieten wir Maschineninstallation, Inbetriebnahme und Mitarbeiterschulung in Übersee an.

3) F: Wie ist Ihr After-Sales-Support?
A: Wir bieten technischen Support sowohl online als auch im Ausland durch erfahrene Techniker.

4) F: Wie macht Ihre Fabrik die Qualitätskontrolle?
A: Unser Unternehmen hat eine strenge Qualitätskontrollpolitik, die den ISO- und CE-Standards entspricht. Jede Maschine muss einen Testlauf durchlaufen, bevor sie für den Versand verpackt wird.

5) Wie kann ich Ihnen vertrauen, dass Maschinen vor dem Versand Tests durchgeführt haben?
A: 1) Wir nehmen das Testvideo zu Ihrer Referenz auf. Oder,
2) Wir begrüßen Ihren Besuch und testen die Maschine selbst in unserer Fabrik.

6) F: Verkaufen Sie nur Standardmaschinen?
A: Wir stellen Standardmaschinen zur Verfügung und akzeptieren auch OEM-Bestellungen.

Für Preis und andere Details freuen wir uns, wenn Sie uns anfragen.


Bitte kontaktieren Sie Frau Lucy

Produktgruppe : Andere Rollformer